Fixing skirting boards: this is how it's done
Fixing skirting boards is not a big problem, but it should still be done with care and attention. After all, the moldings serve as a visually appealing finish between the wall and the floor. Different methods of installing skirting boards are presented here.
Installing skirting boards: an overview of methods
The hobby craftsman can install skirting boards in a variety of ways. The options range from gluing and screwing to nailing. Another option is to use clips for the baseboards. No matter how the installation is ultimately done, always disappear so joints and cables visually behind the moldings. Before the amateur craftsman can attach the baseboards with his desired method, he measures the room and cuts the moldings. Then the project "fixing skirting boards" can begin.
Option 1: Glue skirting boards
Fix skirting boards without screwing or nailing? Yes, it is possible. Craftsmen can glue skirting boards. With this method, almost all skirting boards can be fixed. Adhesive tapes or a mounting adhesive are used for this purpose. Skirting boards can also be glued with hot glue. This is especially appropriate when it comes to wet rooms such as the bathroom. Those who use mounting adhesive to glue the baseboards benefit from increased flexibility. The skirting can be removed again without difficulty.
Implementation skirting boards glue: Before the craftsman can use adhesive to attach the baseboards, he applies the adhesive compound to the back of the baseboard. Then it is attached in the desired position. With the help of wooden blocks it is possible to fix the skirting boards until the glue is dry. At the corners of the room, the miter of the baseboards is also glued together.
Materials: adhesive tape or mounting glue, wooden blocks
Option 2: Screw skirting boards
Glue or screw the skirting board? Some craftsmen prefer to opt for screwing. Why? Gluing or screwing skirting boards is not a matter of taste; screwing them on makes them hold better. In addition, some prefer this method for visual reasons. For example, those who will install black skirting boards with gold-colored screws, can create effective accents. And what else can influence the craftsman on the question of "gluing or screwing skirting boards"? The amount of work. It is higher when screwing the skirting boards.
Implementation skirting boards fasten with screws: it is necessary to drill holes in the wall and insert dowels. Then the baseboards are drilled and the screws are countersunk. Special care should be taken with tiles made of porcelain stoneware or natural stone.
Materials: drill, dowels, screws
Option 3: Nailing skirting boards
Which is better: gluing or nailing skirting boards? That depends on personal preference and the type of molding. For example, solid wood baseboards can be easily attached to the wall with nails. These nails are called steel pins because they have a very small head. They are hardly noticeable.
Implementation skirting boards mount with nails: Sufficient steel pins should be ready. They are placed at a distance of 30 to 40 cm.
Materials: hammer, steel pins, possibly drift
Option 4: Skirting board clips
There is a big difference between gluing or clipping skirting boards. Thus, it is particularly costly to use clips for the skirting boards. On the other hand, it is the most practical method, which is why some experienced craftsmen always opt for the clips when it comes to the question of "gluing or clipping skirting boards". Without difficulty, the moldings can be removed and replaced in this way. In addition, it is possible to remove and replace defective parquet or laminate. Thanks to the clip method, cables behind the moldings remain accessible.
Implementation skirting clips: In the first step, the craftsman attaches mounting clips with dowels and screws. In the second step, he places the baseboards in these.
Materials: clips, screws and suitable dowels, drill, screwdriver
Installing baseboards: Advantages and disadvantages of different methods
What is the best method for a craftsman to install baseboards? There is no clear answer to this question, because personal preferences and the materials used are important here. To make the work easier for themselves, many choose to attach skirting boards without screws. Glue or nails are then the means of choice. The main disadvantage of these methods is the time-consuming removal of the moldings. This is different when screwing and using clips. Especially the application of clips requires a lot of accuracy and precision, but in return it is easier to handle afterwards. How you want to attach skirting boards, you decide. With all methods, you can achieve convincing results.